Online Store

Oxygen Sensors

Should you need a sensor not listed below, please Contact us with your requirements.

Juergensen Marine HH22 Hammerhead Oxygen Sensor
JM HH22
The Juergensen Marine HH22 Hammerhead Oxygen fully meets requirements of the Hammerhead CCR and the electronics including Rev C and Rev D as well as any of the previous models compatible with R22D-type sensor specification. It features the standard M16 x 1mm thread, 3-pin Molex connector with output in air at the surface between 9 – 13 mV and response time of less than 5sec.
Specifications
Output: 9 – 13 mV
Output connector: 3 pin Molex
Input: Threaded M16 x 1mm
Input O ring: Yes
Range: 0 – 100% oxygen
Pressure range: 600 to 2500 mbar
Linearity error: 0.1 to 1.0 bar < 3% relative, 0.1 to 2.5 bar < 5% relative
Warm up time: less than 30 minutes after sensor installed
Response time: less than 5 s for 90% of final value.
Operating humidity: 0 – 99% R.H. (non-condensing)
Operating temperature range: 0 – 50 ºC
Storage temperature: -20 to +50 ºC
Recommended storage temperature: +5 to +15 ºC
Temperature compensation: Integrated NTC network
Temperature compensation error: 0 °C to 50 °C, 5% relative error
Nominal sensor life: more than 500,000 % oxygen hours
Shelf life: 24 months
Conformal coating on PCB: Yes
Pressure equalization – PCB: Yes
Weight: 25 g
Packaging: Gas barrier bag and a box
Warranty period: 12 months

OUT OF STOCK!

Analytical Industries PSR-11-39-MD Oxygen Sensor AII PSR-11-39-MD The Analytical Industries PSR-11-39-MD Oxygen Sensor is the most commonly used '10 mV in Air' type in the scuba industry, popular in both rebreathers and analyzers. The PSR-11-39-MD, with a 3-pin Molex connector, is compatible with the Teledyne R-22D and Maxtec MAX-305F. This type of connector is used in the O2ptima, Prism2 (but not Explorer), KISS Classic/GEM and upgraded KISS Sport, Megalodon and Pathfinder, Hammerhead, Poseidon, rEvo, and many other brands of rebreathers. Specifications Connector: Molex Range: 0-100% Oxygen Signal Output: 8.5-13 mV Response 90%: 6 sec Expected Life: 42 months Warranty: 12 months
OUT OF STOCK!
Analytical Industries PSR-11-39-MHD Oxygen Sensor AII PSR-11-39-MHD The PSR-11-39-MHD is a special version of the PSR-11-39-MD which provides a slightly higher mV range. Do not use the MHD version unless recommended by the rebreather OEM for your specific unit because otherwise some sensor validation checks may produce misleading results. Specifications Connector: Molex Range: 0-100% Oxygen Signal Output: 9-13 mV Response 90%: 6 sec Expected Life: 42 months Warranty: 12 months
OUT OF STOCK!
Terms and Conditions All shipping costs are calculated for the customers based on the UK mainland. For international orders, please Contact us directly for a quote or with any other shipping queries. Payment is handled by PayPal, but you do not need a PayPal account to pay. All major credit cards are accepted. Should the stock become exhausted, we reserve the right to postpone or cancel your order. For more details please see our Delivery Policy. Delivery Policy Return & Exchange Policy Privacy Policy & Legal Disclaimer